For use with this 7 inch LCD with touchscreen: https://www.waveshare.com/wiki/7inch_HDMI_LCD_(B)
And either the CubieTruck board:
or a Raspberry Pi with case. Raspberry Pi case should be 97 mm or less long and 60 mm or less wide.
Print two stands and glue M3 nuts into the appropriate holes with cyanacrylate glue (super glue). Mount the display to the stand with M3 screws.
Base and stand should fit tightly and do not require screws or glue.
Have fun with the model!
Everything needs to be printed with supports. Stands and Raspberry Pi base can be printed without raft, Cubietruck base should be printed with raft.