Model of the Temple of the Time from The Legend of Zelda - Breath of the Wild
I've received a few requests to add the goddess and some other small items missing from the original STL. The newest model (v2) has the goddess and small headstones on the sides incorporated. I will continue to add in details and update with newer versions.
I've also made minor improvements to the model which should help improve slicing.
Ran a test print of the newest version to see how it would come out (see pictures). Printed it on a small scale (0.6) so details came out a little smudgy (plus my current printer has issues I can't for some reason figure out). Printed at .2mm detail with supports and brim and a 20% infill. Single material (PLA). Result was decent after a 14hr print at 40mm/s. Removing the supports was very hard, especially for the small rooms in the front of the temple. Getting the material out without damaging the stairs and bird statues was impossible. One small area on the sides of the entrance still does not print; I will have to use a shell modifier and upload a new version to fix. I HIGHLY recommend printing this with a dissolvable filament for support as it's almost a guarantee you will damage the print trying to remove them. Check back soon for an updated version. If you like my work, please consider sending me a tip via my profile page. As always, I appreciate the support!
After hours and hours of losing my mind I think I've finally got this model to a point where it will print well. I've replaced the STL with a new one. Still waiting on my MK3 to arrive to print this with dissolvable supports.