Guitar Wall Hanger

by JustinSpanier Feb 2, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Im going to make one. What screw size did you use? Did you use anything to keep the screw from pulling the wall out? My walls are like cardboard...sadly.

You can use toggle bolts if your walls are really thin, or if you screw it into a stud, plain old drywall screws will do the trick. I used the screw-in type drywall anchors for mine. (See pictures)

Justin, this works really well. Thank yoy.

Glad you like it...but make sure you take the guitar off the wall and wail on it once in a while;)

Thank you. I made one. Once I put it up I'll hang the start up and post it here. Many thanks

Looks good, any suggestions on printing? Layer height, number of shells, infill, etc?

I printed these things so long ago, that I'm not 100% certain, but I'm pretty sure I had the layer height set to .1, the shell thickness at 1.6, and the infill at 30%.

Cool, that's lighter than I was expecting, but good to hear. Thanks! I know a couple folks who might just want these.