Headphone Holder

by anth92 Mar 22, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Fit Perfect!
Thanks for sharing that design.

Created one. Hole was tight and the pin needed sanding. Pin in a little too thin for my liking, I'm a little afraid that it might break if you are not careful. Also the width of the clamp turned out a little too big, but inserted couple of paper strips to make it more tight. Still moves around a little. You may consider printing another holder. For example this one (I have not printed this yet but it seems better https://www.thingiverse.com/thing:1657541)

Monster Mouth Headphone Holder - Clampable

the hole is way too tight

needed to trim the pin a bit to fit.

should make the hole about 0.5mm wider and allow application of hot glue into the hole when sticking in the pin.

Once you have the sizing correct for your desk, how stable is it? Does it come off easily when reaching for the headphones? Would a bump to it knock it off? Seriously considering printing this if I can make it nice and snug.

I'm new to all this, but would love this stand, could you do me a 50 mm one if possible , no problem if not.

What are the dimension of the pin?
Would like to quickly create my own "holder" part.


The hole is 6mm by 6mm in Solidworks so actual printed dimensions will be smaller.