Following a request, and having thought about for a while, Here is a kit to convert the gunship ! It is not 100% accurate, but it should do the job.
update 05/02/2018 : corrected Avenger_cannon (mesh error) and turret_cannon+turret_base (hard to fit)
update 11/02/2018 : added a turret with dual bolter (thank you crocoloco)
Basically here is what you need to change :
On the front of the ship :
- remove the front door
- install the avenger bolt cannons inside the hole
- glue the avenger_back part at the back of the lower part of the front (optional)
- replace the 2 front bolters with sensors on the small front turret
On the back of the ship :
- remove lateral doors
- install the turret base instead (print 1 + 1 mirrored)
- 2 different turrets :
- plug the dual bolter turrets on the base (print 1 + 1mirrored)
- plug the turret on the base (print 1 + 1mirrored)
- plug the weapons on the turrets (print 2x2 cannons)
I'll try to add some more parts on the kit, in particular the replacement for the rocket launchers on the top. and some other variants for the side turrets weapons.
and now have fun !
== Please consider sending tips if you like my printable models ==
Copyright infringement is not intended. Parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way. These models are for personal use as proxies and should never be sold. If it causes copyright issues, i will remove it.