Updated and added Fusion 360 File. Please adjust as you see fit. :)
- Sorry for the horrible construction timeline.
I liked the idea of Idig3d's Precision Thumbwheel (https://www.thingiverse.com/thing:2603493), so, I created my own.
Given that the Tevo Tarantula is smaller than the CR-10 the dial could not be as big. And thus I can't do numbers. But the concept is the same.
This was also done as part of my Overall Bed Design Project. Other parts are included here:
Corner Clips: https://www.thingiverse.com/thing:2842383
For those that are using with the above y Carriage, note that if you use the no supports version, you need to use the modified version of the thumb dial to ensure clearance.
How to Use the Dial
The pitch on the bed screws is 0.5, therefore 1/5 of a turn (the difference between every big nub, or spoke) is 0.1mm in height. The smaller nubs are separated by an angle that would give 0.02mm in height. This would work well if you have a feeler gauge.
Note: For the discerning eye, the images are of a previous version.
Model designed for no supports. Should fit directly on the stock thumbscrew. However, have included a test print to ensure that you have the correct scale before you print out an entire plate.