There were not too many option for the Titan Aero extruder for the TronXY X5S, so I created one. I used the stock extruder motor for the Titan. I used the stock M3 screws that attach the stock extruder to the stock extruder plate, and the stock bushings behind the stock metal extruder plate.
The 6mm spacers go between the rear gantry plate and the wheels. Use the M5x35mm bolts with nuts to fasten the rear plate to the stock extruder plate. There are cutouts in the Titan mounting plate to accommodate the heads of the M5 bolts. The cutouts are 10mm diameter and are 5mm deep.
Print 3 of the 6mm spacers and 2 of the 20mm spacers.
For infill, I used 50% for the Titan Aero Mount plate, rear plate and fan plate. The layer cooler and supports, i used 20%. All parts were 3 top/bottom layers, and 3 perimeter outlines. I used support for the large hole for the extruder motor to prevent any sagging.
I have include the .SLDPRT files for the main components if you need to modify them to fit your needs.
You will need:
- 3 M5x35mm bolts
- 3 M5x0.8 nuts
- 2 M4x30mm bolts
- 2 M4 lock nuts
- 2 M5x8 (or M5x10) bolts to fasten the fan to the fan plate.