I needed some stronger leg extensions to help with some stability CR-10 while printing. I made a model similar to this, but this one has thicker feet, and a 15mm taller collar to fit around the leg.
I printed these using PolyMaker PC-Max, although PETG or ABS would work just fine. If you're not using PC-Max, leave your fan on.
Added a second model to include countersunk holes
Feel free to tip if you like it. $1.00USD buys me a cup of tea.
I like tea.
See Notes for Settings
Sliced in Simplify3D with the following settings:
Nozzle Temp: 255
Bed temp: 80
Fan: Off (If not using PC-Max or another polycarbonate leave the fans on)
Raft: Yes; Separation Distance .3mm (Optional for non-PC-Max. ro polycarbonate prints, but it couldn't hurt. Given the surface area of the print on the bed, it will prevent warping and help with adhesion.)
Print Speed: 30mm/s
Infill: 75 - 100% (I used 100%)