Element board and round tracker for the Gloomhaven board game.
Tested with a 15% Grid pattern infill which may have been a bit overboard.
The round tracker is slightly narrower than the official one to accommodate the 'metal' brackets at the corners. The Element board has holes to accept pegs on the tracker.
Edit 2/12/18: Added a board without the element symbols by request.
Edit: Round Tracker is up! This can be attached to the back of the element board via the pegs (remember to break off the built in supports first!). I toy with the idea of making the element board thinner which would mean the text and symbols would not be as deep. Feedback welcome.
Gloomhaven is copyright to Issac Childres and Cephalofair Games. If they ask for me to remove it, it gets removed, no questions asked.
Use a Brim at 2-3mm to prime your extruder. Print at the best resolution you can, but be aware the element board is huge and will take half a day at the least to print.
Never use AutoCAD for 3d work
Once upon a time, Autodesk added 3d tools to AutoCAD and many of us weeped.....because it was so damn clunky and horrid and awful.
Many years later, 2018 (this weekend as of this writing), I tried it again and it was still clunky. Improved, but there are better free 3d tools. ACAD is amazing for 2d work, not so much 3d in my experience.
This was made with ACAD 2017 taking dimensions from the original cutout board, element symbols and font straight from Issac's fantastic free Gloomhaven resource upload.
Next thing will be done in something else....