Piggybank Snap Plug
by renelm, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A simple snap-in plug for a 32mm hole in the bottom of a Piggybank. The scad-script is made for a material thickness of around 4mm and with a bit of tolerance to allow for a layer of varnish or paint.
Play around with the tolerances in the script for a good, tight fit, vs. ease to remove the plug.
I have printed loads of these in PLA. and most of mine are so flexible that the pins won't break when removing and inserting the plug, but do test it out, as I have experienced that at least one of the PLAs I had turned very brittle after printing.
Upgrade this Thing with Thingiverse Apps
Piggybank Snap Plug by renelm is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving renelm a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure renelm would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).