Made this lock so i could airtight close the enclosure for my 3d printer.
You will need some extra parts:
- M5x35 bolt
- M5 washer
- M8x30 Bolt
- M8 Nut
- Screws to install base
- Put the M8x35 into the bolt holder base
- Screw the base down
- Screw the holder screen on the window
- Put the M5 bolt through the base and the bolt holder base with a washer on the downside of the bolt holder base.
- Push the M8 nut into the underside of the knob
50% (Bolt holder base.stl at 100%)
Made it out of ABS at 243C nozzle and 105C bed.
Speed : 50mm/s