This is a remix of my Delta Carriage for 2020 Aluminum V-Slot® 20x20 Linear Rail: https://www.thingiverse.com/thing:2753542.
This is exactly the same except that the Mag Ball spacing is 55mm instead of 48mm spacing.
So please head over to the original design for instructions and parts list.
I made this one to go with the Duet PCB Smart Effector.
July 18th 2018 Update:
Cleaned up the carriage a bit and removed some holes that I thought were not needed.
Since I made to be mounted to the gantry plate the carriage didn't need to be as thick. I shaved off 2mm.
More from 3D Printers
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving quadcells a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.