Wall mount 15 pc high density hand driver holder, 23mm hole side, handle side down, nut side up for easy identification and fit test without need to remove the tools, tools stays upright and tidy.
Scale X and Y to adjust to your hole size needs.
Scale Z to your height need of bottom piece and don't have to use the top piece, but this could use more material vs using shorter top and bottom pieces.
Originally made for Harbor Freights nut drivers, but I had to scale X and Y to 1.05 to make it fit all the drivers as they do vary within the same set.
Bottom piece has a beveled base to keep the tool from falling through. Top piece has consistent hole dimension all the way though.
To print a quick test fit for your drivers, print the first couple of layers of the top piece as a template, remove it from the bed and test if all your drivers fit to your liking, scale X and Y as required.
Prints on 22cm x 22cm bed size at 45 deg diagonal angle.