D1M BLOCK - ESP12
by IOT123, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is the casing for the D1M ESP12 BLOCK; a stackable module that includes a breakout for the bare (except for resistors and capacitor) ESP12 or a power regulated ESP12 module. It is to be programmed with the D1M CH340G BLOCK.
These components, a PIN JIG for soldering, and 2 off 8 pin 10mm Long Needle Female Pin Header Strip are required for this build.
Align large, non-beveled surface to bed.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
D1M BLOCK - ESP12 by IOT123 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving IOT123 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure IOT123 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).