This is an Optional Fan with New Shape Blades for "Jet Engine, 3-Spool (thing: 2437217)".
This is designed to simulate for the latest engine's fan.
The Rotor Assy can be replaceable.
STL File (ws: with Special Support)
- Fan-Blade-New-CCW01ws.stl (Original: Fan-Blade201ws.stl)
- Note: Fan-Shaft01.stl and LP-Front-Stop101.stl are not changed.
Printer setting (Recommendation) (used PLA):
- infill: 100%, Layer Height: 0.2mm, No support
- Take care to remove the Special Support for damaging of the blade.
- Finish blade edges and surfaces as required.