Very simple PCB vise
by ByTechLab, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The vise consists only from 3 different 3D printed parts and 2 M6 threaded rods with 6 nuts – it is very easy to make one. Four of the six nuts have additionally printed knobs that tightly fit on them. The vise has V-shaped grooves compatible with PCB,s up to 2.5 mm thick. PCB can be mounted in 4 planes (tilted, vertical, horizontal). In addition, there are holes for cylindrical neodymium magnets 10 x 4 mm at the bottom – also for “press-fit”. This vise was designed in that way to be relatively easy to print on a 3D printer. It is quite small – only 75 mm in width and 32 mm in height so it doesn’t take much valuable space in your workshop.
You need to print:
Recommended printing settings:
Layer height: 0.2 mm
Printing speed: 40-60 mm/s
Infill: Honeycomb 30% or more
Outlines: 2 or more
Top/Bottom 100% layers: 3 or more
Support: Yes - Inside the nut pockets
Nozzle: 0.4 mm
Description of this project on my web page:
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Very simple PCB vise by ByTechLab is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving ByTechLab a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ByTechLab would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).