Gotek Amiga floppy replacement with oled that slides into case this was made to fit into amiga A1200 with usb out eject button hole without modding case if push buttons are short enough.
But may also fit the 600 or A500 .
You will need a short usb extension, 3 micro push button switches, some ribbon cable.
And some soldering / wiring skill to wire oled and switches.
The floppy needs the oled opening and button openings cut out with x-acto.
I did this to keep the layer even and uniform when slicing.
I removed pin-plug from oled and soldered ribbon direct to oled also sharing ground with switches.