Treasure Chest with Hasp and dummy padlock - for Glowforge
by jbv, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is essentially rmm5t's Treasure Chest, re-sized for 1/8" ply.
The layout is arranged to be cut from a single sheet of 12"x20"x1/8" (i.e. Proofgrade®)
Be aware of the orientation of the pieces when you are removing them from the laser: this design layout takes advantage of continuous grain patterns!
It can be assembled without glue, but it will be very fragile. If assembled using glue, it will be solid and usable. I recommend a gel superglue, one formulated for wood if you can find it.
The hinge holes are sized for a wooden BBQ skewer, you may have to adjust them.
The "padlock" is held together with four chicago screws, 5mm in diameter and 8mm deep.
When using a Glowforge and Medium Proofgrade Ply, use the default proofgrade cut settings.
Upgrade this Thing with Thingiverse Apps
Treasure Chest with Hasp and dummy padlock - for Glowforge by jbv is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jbv a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jbv would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).