I made this because I plan to run a CNC rounter and needed something that held the board in place, that had a fan mount, and dust cover. So I decided to make this.
This has inserts for 4MM machine nuts to hold the fan in place. As well as it uses motherboard standoffs that you can screw in by hand to secure the TinyG Board.
There could be some tight/loose tolerances due to just the 3D printing process itself, I've had a couple tight then loose fits without changing anything.
This is the first thing I've modeled for public use, so hopefully it all goes well.
optional if you are using a fan
- 4x 4MM Hex Nut
- 4x 4MM X 30MM screw
- 90mm fan
- dust cover (I just used a speaker screen as mine)
- 4x Motherboard standoffs as well as screws to go into the standoffs