UK Dual Socket Switch Bridge
by fkinell, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Needed to protect a double socket from being accidentally switched off.
This fits in between the two plugs nicely, using a bit of double sided tape on the curved ends.
Also punched a few holes in it so that you can jab the sockets on and off if needed.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bFu6RaLnTID
0.15 but what ever really
10 to 25%
This should scale nicely in the X and Y for different size sockets, and if needed in the Z for larger or toggle switches
Print so that the support is under the square enclosure, as you will not see any of this when stuck to the socket.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
UK Dual Socket Switch Bridge by fkinell is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving fkinell a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure fkinell would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).