by t00tie, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A box shaped as a five pointed star. Straight or twisted sides, parametric size. Parametrical, easy to use OpenSCAD file for boxes with lids. The lid has an inner lip/flange. See pics for the sizes I have tested, printed in PLA.
Either use the STLs directly or change the parameters in the simple OpenSCAD file to get any custom size and twist. The STLs contain both box and lid, use the .scad if you only want one.
If you print these with concentric infill on the outer layers then the pattern will repeat itself for pretty accentuation of the geometry. Maybe you can see this on the close up lid pic?
The scad file also has a module for a simple solid pentagram.
See http://www.thingiverse.com/thing:27716 for pentagons etc.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Pentagram box by t00tie is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving t00tie a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure t00tie would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).