Nema 17 Motor Mount
by TempusEdaxRerum, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is just another Nema 17 motor mount that I designed for my printer to fit onto a 1.5" 8020 extrusion with M6 bolts, nothing fancy.
You shouldn't need any supports for this unless you want to put one in the center hole to keep it from sagging but if not then a little post processing to round it out should be good enough.
40% or more for strength
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Nema 17 Motor Mount by TempusEdaxRerum is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving TempusEdaxRerum a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TempusEdaxRerum would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).