Magnetic Enclosure

by nickodemous Mar 13, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

I love this design its phenomenal however Im having the same issues. I scaled up %100000 as you can see in the picture. Can you check and see if it seems right now? I would like to know before i Start printing, Thank you!

EDIT: Imported all files into "3d Builder" and it fixed them so then I resaved them and it works

Sorry for the late reply (vacation). Your second image shows the corner at 40mm and that matches my model, so I think you're good. Let me know how it works out!

I had the hardest time cutting the plexiglass as it was my first time doing so. I came across just enough old plexiglass to make this still need to acquire the magnets and possibly get some more and recut.

Was my first time too and I ruined more than a few pieces initially. I ended up getting this https://www.amazon.com/gp/product/B000BZZ1D0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 for scoring and used a very small tooth jigsaw when cutting the curves. Also helped when snapping to place a strip of plywood along the score line while pushing up the other side with another piece of wood I clamped in place in order to apply even pressure

all the parts pull up as tiny.

I was using Ultimaker Cura and noticed the same thing. Only when I'm loading a very small part, it shows up an order of 10 smaller then it should and I need to scale it (move the decimal). What slicer are you using?