This is yet another case for the common RepRapDiscount Full Graphic Smart Controller. I wanted a 0.48mm line size (0.4mm nozzle * 1.2) optimized and small angled standalone case without mounting options.
How to support me?
Do you like my things and do you want to support me? You can use these links if you want to buy something. This helps me doing more things. Thanks!
Step 1 - Mount support frame
- Put the support frame between the two PCBs. You don't wanna destroy the SMD parts under the screen PCB. Orient the support frame as shown in the pictures
- Begin with the bottom left hole and use a screw to fix the frame
- Rotate the frame around the Display until all holes are in aligned and in sync between support frame and display. You need to bend the frame a little bit.
Step 2 - Prepare the bottom shell
Take a screwdriver and remove the support of the holes. Apply all four screws as shown in the pictures.
Step 3 - Prepare the top shell
Put the reset knob in the the middle hole of the top case and put the display into the top shell.
Step 4 - Connect the top and bottom shell
Put the bottom shell into the top shell and fasten the screws. The holes in the top shell are already threaded!