Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
DJI F450 top cover and top plate with FPA (water resistant)
by GRees, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a top cover and top plate designed for the DJI450 that protects the quad from damage, and keeps everything tidy. The top plate also provides extra surface area for the user to add more electrical components among other things, and the cover fits snugly over.(((warning, the top plate will cause problems printing. The problem is that there are small extrusions around each hole that do not allow the plate to lay flat on the bed. Because of this the printer will get jammed up and make a huge mess. The best fix for this is to edit the ipt file and take away the small extrusions that are the cause to the problem.)))
Top Cover with FPV-
1 print with low resolution upsidedown with rafts and support (Makerware)
2 have the part upside down
3 put 7/8" rubber grommet in camera hole
4 use standard board FPV camera
5 push camera head into the rubber grommet
6 place telemetry through the hole in the back, and join it with the antenna on the other side
1 print in standard resolution (Maker ware)
2 screw 3d printed top plate over the DJI F450 top plate
How to put the cover on-
1 place the cover over the top plate
2 zip tie cover to arms using tabs (only 2 needed)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
DJI F450 top cover and top plate with FPA (water resistant) by GRees is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving GRees a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure GRees would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).