Compact Bowden Extruder For CR-10
by Tijnv, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Just a simple remix of the Compact Bowden Extruder, direct drive 1.75mm by schlotzz
I removed the mount and reversed the idler for easy tensionscrew access when used on CR-10
I added a version for a m5 and a m6 push-fit bowden connector.
Only use this extruder with a small diameter drive gear. And when doing that you have to be able to change the extruder steps in your printers firmware.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Compact Bowden Extruder For CR-10 by Tijnv is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Tijnv a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Tijnv would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).