The is a camera mount for the Flashforge Finder. I suppose it is a camera mount for any tubing under 19mm in diameter.
The center pin has an adjustable depth and locking screw. The threaded insert is meant to press against the bed clamp, so that when tightened, it will keep the mount from shifting.
I've given a bit of room on the "C" clamp to insert a little foam to increased stepper dampening, if required. The camera mount itself was made for a Logitech C270 webcam, if you want to fit a different model, simply remove the pins and put your own in.
This moves with the bed and has plenty of clearance to remove your prints. You can even use this on any of the open sides of the Finder as there is enough room.
Here is a link to the camera I used from Amazon.
*Updated the threads as I realized this would only work when printed on my Guider 2. Better threads version screws in nicely after printing on the Finder.
You only need to create supports for the threaded C chanel clamp, everything else is support free. Threads come out clean and shouldn't require any post processing at all.
I designed this completely in TinkerCAD using various shapes. Really happy how well it turned out.
I've shared the TinkerCAD project, you can locate here.
Please feel free to make it better than it is.