Titan 2 Rig
by cfastie, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A frame to hold two small cameras for kite or balloon aerial photography. Designed for capturing simultaneous RGB and infrared photos for vegetation analysis. The upper frame can also be used with a single camera tray from the Redstone Rig. Files updated III/09/2015. Learn more at the KAPtery. Published under CERN OHL.
The camera tray and leg brackets need no support (the tray model has support incorporated). The tray model does not slice properly in Simplify 3D but slices well in MakerWare.
New files (III/09/2015) include bolt holes so very little drilling is required to assemble the rig. The KAPtery has detailed instructions and you can order hardware for assembling the rig. Learn about grassroots mapping at Public Lab.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Titan 2 Rig by cfastie is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving cfastie a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cfastie would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).