FUM (Fala union Mono)
by ifala, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The FIRST system open-source that use only one hot end for print 2 color!
you can use this system with :
- Jhead or similar
- budaschnozzle or similar
( adapter : http://www.thingiverse.com/thing:130200)
for more information and story of the development of this system :
Easy install !
-print x-carriage-3dita (available only for prusa i3 ..for now..)
-print Fum_3mm_rev5 (2x gear big and small)
-print MagicHole (positive and negative)
(insert inside MagicHole_negative a little section of a poliuretane tube, close with MagicHole_positive, and make a bore of 3mm )
- 2 M5 2cm
- 2 Drive gear (3mm)
- 4 bearings 605
- 2 bearing 624
- 2 M4 1.4 cm
define EXTRUDE_MINTEMP 20
define EXTRUDERS 2
Use this CURA setting:
-->Machine Setting : Set 2 extruder
Speed and temperature:
-2nd nozzle temperature :20 (C)
Support Dual Extrusion:
Wipe&Prime tower (check)
- Speed :40mm/sec
- Dual Extrusion Amount : 54 mm
- Dual Extrusion overlap : 0.15 (depends.. you must try your best setting with your pla-abs...)
Set the speed to 40 - 60 mm/sec
and try to print on the lowest temperature ...
------------------------- (to do only at the start of the print)----
in the start of print after the first retraction... press pause and M84 (disable stepper motor)
and move the 2 filament with gears/hands
first filament inside the nozzle (ready to print)
second filament on the start of (Y) conjunction
(don't worry about extra flow in start of printing during the skirt... is autocalibrating system of FUM ;)
in the github repository you can find the Slic3r setting, scad file...and you can collaborate!
-study better fan placement
-test and develop a basket .. for eliminate the wipe&prime tower..
-Develop a better gcode for Slic3r (Tool change G-code)
more info on:
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
FUM (Fala union Mono) by ifala is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ifala a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ifala would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).