Filament guide for Wanhao Duplicator i3 Mini / Cocoon Create Model Maker.
I noticed that the filament was ruining on my CCMM and ruining its paint job. I wasn't very happy about that, so I decided to make a filament guide.
Uses the existing countersunk M3 screws. You can use longer ones, if you wish, but they shouldn't be necessary.
It can make putting the filament in a little tricky, unfortunately, especially towards the end of the roll when it's curlier.
Cocoon Create Model Maker
Model pictured was printed with Cura's variable layer height, 0.2-0.4mm.
Supports may be needed, depending on how great your printer is at overhangs.