This the 260mm base plate for a hexapod, with housings for Futaba S3003 Servos. The housing is made for bearings 6x13x3.5mm on the upper side. (see more about it at: https://www.thingiverse.com/thing:2806514 )
Seen the bottom plate is bigger than 250mm the file is a dxf for cnc milling. All the other part are designed in a way that they can be printed with a 200x200 build platform.
The milled base plate I could deliver if you don't find yourself a way to build it, the price depends on material chosen.
This is a project of MachWas www.machwas-makerspace.ch
The drawing is made with SolidWorks 2017 and yes, the professional way to design it would be another one, than the one I have chosen. But seen I'm not good in free form designing, I chose the tricky way to realize the design it. So I did design the bottom plate as basic drawing and I designed the base of all the parts on that one. Then copied that base into another SW file and then modeling outgoing from that one next part.
The dome part I did design first as one single part, saved a copy of it, and then cut the lower part of the dome first. Same I did with the upper part of the dome and then made the finishing of these two parts, to get a cover that can be taken away.
To connect the upper part of the dome to the lower part, I designed pockets for 8x4mm super magnets. and 4mm tubes at the opposite side. So the cover could be taken of very easy but would hold well .
If you have no possibility to make the bottom plate and if you're from Switzerland, you can contact me to make you one. The price depends on the Material you want.
Gerne dürfen Sie unseren Verein mit einer kleinen Spende unterstützen
Spenden bitte auf folgendes Konto:
IBAN CH15 8009 7000 0067 4768 7 PC: 40-12286-8 Raiffeisenbank Laufental - Thierstein