Added a long mount that has both mounting (with and without C270 Bracket) on the end.
BTW the long mount is a great place to add some LED's along the rail to light the part as you are printing.
Added a longer taller camera mount that gives a little higher aspect and more bed area view. It adds 20mm to height and 50mm to length.
This is similar to a few of the bed mounts out there with 1 simple but important feature the others don’t incorporate. The similar mounts I have tried seem to be fairly loose to the plate. They incorporate a hole completely thru the top side of the clip to allow the spring to sit back on the plate and the clip to ride freely around it. I thought, instead of making that hole all the way thru why not make it a pocket and use the spring tension to help hold it fast. My mount incorporates this feature.
Example videos using this mount. “A Benchy Is Born”
More from 3D Printer Accessories
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving dpetsel a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.