CR 10 Flexi Foot (Anti-Vibration)
by tkeenan9, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I Printed the foot cup in PLA and the Foot pad in a flexible filament i bought two 9mm outside diameter springs with a 1.5mm wire thicknes and 40mm length off ebay and cut them in half also you will need to trim the ends of the springs to allow them to screw into the helix inside the foot and cup
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
CR 10 Flexi Foot (Anti-Vibration) by tkeenan9 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving tkeenan9 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tkeenan9 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).