Another stepper motor cover made to meet the wire management and space needs for my CNC router build. IdefixRC's cover almost did it for me, but it was very difficult to get the nut on the connector. So I started from scratch and put the connector hole on a removable lid to make it easier to put together. I don't have double shaft motors so I just made the whole thing shallower to tighten up my build. Also, I worked it out so there is no need to print supports.
Connector lid is attached with 2 M3x10mm socket head cap screws
Cover attaches to the motor with 4 (or just 2) M3x10mm socket head cap screws
Uses the popular GX16 connector.
Update 2019-01-20: Added a variant with GX connector on the side opposite the wires and a variant with a hole for a double shaft.