The mount is fiddly due to packaging constraints.
You need to screw down the mount to the effector first, and then assemble the titan on it. It's so nice seeing retractions work without the slop of a bowden tube though! I'm all set to print up some ninjaflex. Not to mention, it's so easy to load filament now.
wiring effort depends on how you want to roll with it. Added a small mount for the stock PCB. But if you want to get rid of the umbilical wiring entirely, use the other one.
Overall, the weight is about the same as the stock setup if not a bit heavier if I had to guess.
Nozzle is centered.
First print video.
Interestingly, the noise has gone down with this setup.
- The small 25mm stepper is much quieter than the 60mm long one.
- I was able to eliminate a fan that was cooling the 60mm stepper.
- The 40mm heatsink fan on the aero clone is much quieter than the OEM 40mm fan as well as a 30mm fan i had on my e3d v6 clone mount.