Modified the toolplate for this holder to fit 25.4mm pipes filename toolplate_25.4mm.stl
ist uploaded in the files sections. Enjoy
Yeah and i also uploaded a toolholder without the laser mount on the side, you will find it in files sections:)
This is not a construct update, more an review of the v2 toolholder. I have now tested it out for some time, And it has worked great, iam working some more on the dust collector. The router is nice and cold after 5-6 hours going on high speed, That is really good.
Makita toolholder v2.stl This is my new version of the toolholder, on this you will have the air blow out on the side and not down .
you will need theese files.
makita toolholder v2.stl
tool release button v2.stl
update: 24.03.2018 :
- for a new cable mount on the makita. m3x20mm 2x and 2x m4x20mm bolts, 2x m4 nuts.
makita cable lock 2.stl
makita cable lock 1.stl
mal1mm.stl is just a drill template so you get the holes right
- Cable relif for the laser mount, bolt on the orginal mount
lasermount cable relif.stl
This router mount is designed to fit the 25mm pipes on the MPCNC.
It has a magnetic dustshoe, (not tested yet)
The mount also have quick connect of laser mount on the side, and a pen holder.
The whole thing is mounted with m4 bolts and m4 nylock nuts,
outer measurment on my m4 nylock nut is 6.88 mm so theese fit really snug into the design.
You will need 17 of theese.
you also need 9 m4x20mm bolts with hex socket head, outer diameter on the bolt head is 7mm .
4 x m4x20 mm with philipshead bolts to mount the toolplate to the z-axe.
everything fits very good in this design so its easy to build.
Magnets you need some to hold the dust shoe in place. Neodym magnets 10x1mm disc magnets is what you need.
Laser it is this one, and it bolts right on my mount with 4 m3x10mm bolts.
To print out the parts its nothing fanzy, only place i used support was in the dust shoe.