When printing the ABSDBS-8 telescope, you might also want to print a spider and a adjustable secondary mirror holder aswell.
Look no further! You just found all you need.
Additional material needed:
- M3x45mm Screws (4) - for attaching the spider to the scope
- M3x50mm Screws (3) - for adjusting the secondary mirror
- M3x10mm Screw (1) - for holding together the secondary mirror holder
- M3 Nuts (8)
- 3 Springs - to make the secondary mirror adjustable
Spider trusses are 2mm wide - just enough to keep the secondary mirror in place and keep a good visual impression.