Amiga 2000 Gotek USB bracket - FlashFloppy OLED
It's a bracket for the well known Amiga Gotek drives which now supports 0.91" OLED displays when using the FlashFloppy firmware.
More info: https://github.com/keirf/FlashFloppy
I've used the Chinon FB-357A disk drive as an example for measurements.
Markers have been placed on the front-support for easy allignment, same goes for the OLED display case.
There is also enough space for a rotary encoder just above the USB port.
The middle vertical front support is optional, might give more stability to the front when using rotary encoder.
More info on how to connect the OLED display to the Gotek drive can be found here: https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods
Note: you can choose if you want to print the front with or without Amiga logo.
The picture of the OLED box is just to show how the pins are connected.
Normal - 0.1mm layer height
I've used a 8mm brim for the front and the base