In trying to print the PacMan Maze, (https://www.thingiverse.com/thing:2805680), I wasn't quite happy with the ghosts being used so I set about modelling my own. I wanted to be truer to the original (Only 3 bottom ripples when viewed face on) and add a bit more flair. So here's my design.
I made the eyes as a separate piece that pops right into the model so you can print that part using white filament.
I've uploaded 2 variant of the model. One Hollow and one with a central stem that can accommodate a 1/8 magnet.
I printed the regular Ghost without any support.
I also uploaded a scary ghost version (when they turn blue). That one most definitely need support. the mouth was filled with caulking
Support not needed for regular ghost but needed for scary ghost.
Sanded and gloss varnish spray and just used a sharpie on the eyeball.