A lcd stand / box for the standard LCD12864 bought on ebay for about 10$, I designed this for use with my MPCNC.
Mounting, put the LCD controller in first it will go in just fine, get the button in place, take one of the sides, they fit onto the LCD printboard. its different on the right and left side.
You will need 5 m3x20mm hex bolts on each side. There is threads in this design, so print on a good Printer and you will be fine.
The flat cables routes out the hole in the back. there is plenty of space in the design .
The stand is mounted with one m8 bolt with nut.
Happy making .
The box has to be printed on the side, with supports.
The button and the sides you just print on the back, no support needed.
Designed in fusion 360