Just in time for Easter!
Holds your eggs just perfect and allows you to get nice straight stripes and lines to decorate your eggs.
I designed this quick to be an easy print for even very small printers (doing mine on a Monoprice mini no problem)
Printing now, but I wanted to get it up in time for people to try and/or remix in time for Easter Weekend.
Let me know how it works and hopefully it gives you are your family something to smile about!
Notes on printing:
The parts diagram photo shows recommended printing orientations.
HELPFUL NOTE! YOU WILL NEED TO SCALE THE ADJUSTMENT SCREW ON THE X & Y AXIS TO MATCH THE SHRINK RATE OF YOUR CHOSEN FILAMENT (LEAVE THE Z-AXIS ALONE) Otherwise the screw will bind.
Everything else has already been scaled with enough margins so you should be good for all standard materials.
The only tricky part of this print is the egg holding cups, I am doing 1.2mm thick walls and printing super slow (20mm/s) on the layers that form the apex of the "dome"
Use whatever tricks work best for your setup on printing inverted arches and domes.
Everything else is straightforward and is designed to be printed in the orientation shown on the exploded parts diagram picture.