Loading
Alexandr_sk8

Cnc 3018 (1610) Enclosure for Woodpecker GRBL

by Alexandr_sk8 Mar 29, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Great Design thanx....
But I'm confused on the fan... I assume it's 12v and gets power from the 12v out on the board...

thx

I already have the box and so won't be printing it again. As I said, I have the older GRBL 0.9 board. There are pictures everywhere of this board. The front picture shows my board in the box and there is very little gap between the box inner edge and the board. I thought maybe my print was off but the bolt pattern aligns perfectly with my board, your box and with the 3018.

You can see where the bolts on your board are much closer to the edge than mine which is what's causing the problem getting the board to go in. No big deal, I still like your box the best but if other people want to print it and have the older board like I do, it's impossible to get the board to fit in the box without cutting the Cover mounts up a little bit. The solution is to simply make the box 3-4 mm longer on the bottom side but maintain all the holes and notches for USB and power as they align with my board perfectly. Does that explain it enough for you?

P.S. By "Bottom" I mean the side that has the slots in it and is facing down when you mount the box on the back of the 3018

Hey so I have the older version of the grbl board which does not have the 8 pin connector. I had to do a little bit of finagling to cut back the cover mounts. I tried to add a photo here but for some reason it's not allowing me to on my phone so I added some photos as part of a make for your box

I will gladly change the model for you, but I did not quite understand what exactly needs to be changed. I ask you to clearly show what and where to do

I just printed this and the board just won't clear the tabs. You may want to adjust the tab size just a hair.

can you send me a photo or what kind of information, what exactly does not suit you? sk8print@inbox.ru