This is my third Banksy picture in a series of pictures I plan to create. This picture measures 124 x 80 mm and stands upright.
This model utilizes the ability to pause prints at specific heights to swap out filaments and continue printing.
I used FlashPrint as my slicer since it conveniently includes the option to pause a print as many times as you would like at any specified height. It also allows you to change the temperature of the nozzle if necessary at each height.
MUST BE PRINTED WITH A LAYER HEIGHT OF 0.20 MM, INCLUDING THE FIRST LAYER
There are 2 variants to this model. They are as follows:
Boy Meets Girl 1 - Pause at 6.0 mm to swap out filaments for the boy and girl. This model is designed to have the entire picture one solid color that is separate from the background.
Boy Meets Girl 2 - Pause at 6.0 mm for the boy, girl, and hill. Pause at 6.6 mm for the weapon. Pause at 7.4 mm for the flowers. This version is depicted in the main photo above.
Feel free to get as creative as you would like with the color schemes and share them for everyone to see.
Custom supports are built into the models.
Print with 2 shells and choose a speed that is not too fast to capture the smaller details.
The support piece slides into the slots on the back of the picture. Press it up and inward until it is nice and snug. Feel free to add a couple drops of glue if you want to make sure it stays inserted.