Anet E10 Ultimate Carriage

by ashdinalt Mar 31, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Are the top wheel spacing the same as stock? I am trying to mount a BLTOUCH to the back and I want to be lazy and use the existing design for back mount.

Hello, After i make and install carriage fan at 100% reduces the temperature of the nozzle and the printer stops, you have to print at 10%, you also? (Google translate)

It all depends on your fan power, but anyways it shoud not work like that. In my case, also with other carriages, when fans start, the nozzle temp is dropped by a few degress, which is expectable, but then printer turns on heater and gets the temp back in few seconds. That's how it operates. Temp sensor in the heater block is there for it.

Thanks a lot! Made for Anet E12 but had to reduce bottom V-Wheel part by 3mm in order to make a carriage sit tight on a rail. Also added autolevel holder.

You are very welcome! The bottom part is designed double-sided. If it doesn't sit tight - just turn it upside down )) Or may me it's just a material shrinkage )

Yeah, I had to reduce it even after turning it upside down :)

Awsome! Thanks a lot, such a amazing improvement for my 3d printer Anet E10.
Next will convert to and E3D V6! Do you habe some conversion for this amazing Anet E10 Ultimate Carriage?

Hi! Thanks for the feed back!!! I believe, the best Ultimate conversion for E3DV6 head is here https://www.thingiverse.com/thing:2494642
It is fully customizable and very similar by overall construction to mine. But you will need a main metal carriage plate from CR-10, on which you can use existing V-Wheels.

CR-10 Heavy Duty customisable modular e3D V6 mount Volcano 5015 ABL
by chito

Can I use that conversion with your fantastic Ultimate Carriage?

You are welcome to use it whatever you like, except for commerce ))

there are some corrupt files .... could you replace them or put the steps?
thank you
file n 05

What file? E10_UltimateCarriage_05_FanShroud.stl? I just tried it, download it from here and it opens fine with Cura 3.2.1, Cura 3.3.1, as well as with Simplify3D. Give me your e-mail, I can try to repack 05 file and send it to you to try. But I'm not really sure, what problem we are dealing with here.