Tevo Tornado / CR-10 - Y-axis stepper motor flat support bracket

by mosill Apr 2, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Something's wrong with the model. When I try to add a raft to this model, it makes a miniscule one. After moving it down 0.02mm into the bed, making raft becomes possible. See attached files.

Other than that, it prints ok and works well :)

same probleme for me on s3d

I've never seen the issue that you are describing, but you should be able to print this model flat without a raft. The bracket is small and has a large flat surface so shouldn't have any trouble with bed adhesion when printing.

Hi there
Would like to give this a go, but when loaded into Cura, it's about 3x the bed volume ;)
Something an issue with the scale somehow?
Can you check it, and possibly reload? Not experienced this with any other stl files here.
Or, give dimensions on how large it needs to be so the scale can be altered manually?

That's odd that my file scaled up for some reason. I will try to rescale the file and upload it again.

In the meantime, in Cura set the the scale to 10% and it will be sized correctly.

I just reuploaded the file that is scaled correctly. Thanks @RockoWallaby for bringing the issue to my attention.