Simple remix/split booster stage of Zastro's awesome project so I can print it huge on my CR10.
Full video: https://www.youtube.com/watch?v=LxKUwY35Ejk
Use my CR10 profile for rockets found here: https://github.com/MKme/CR10-3D-Printer-Settings-and-Reference/tree/master/Printer%20Settings
I have split the booster in to 4 pieces and scaled it up. The nozzles are a separate .stl. Flip them over in your print program and slice with some infill and normal settings. This allows the remainder of the booster to be printed in spiral mode (Cura was unable to do this with the nozzles attached)
At 300% in Cura it fills up my CR10 nicely. Meshmixer files included as well.
April 6-2018 UPDATE:
Shuttle was scaled wrong- Fixed
Shuttle now has a Version 2 with the nose split in to a second piece. This allows spiral print of the majority of the vehicle and print nose with infill so tip is smooth.
April 7 2018 UPDATE:
Shuttle did not print well in spiral right below where I split the nose initially. Split moved lower now. Print nose 1 piece in spiral and nose 2 piece with infill - should be resolved now for huge prints.
Flip Nozzle stl 180 degrees and print with infill. Remainder can be printed spiral/vase mode no infill. Still testing this now. 300% seems to fit well on the CR10 for a huge model.
Use Shuttle Top Version 2 is you would like to print the nose with infill for a smoother result.