A custom cased designed for the Duet Wifi controller board. There are no mount surfaces on the outside of the case. I provided the step file so you may add your own mount surfaces as well as any holes you may want to use for your own application. The case was designed around this model as reference. https://grabcad.com/library/duet-wifi-1
There should be plenty of room inside for all types of wiring configurations. I included 3 1/2in holes in the bottom of the case where wiring in loom or spiral wrap can be inserted as well as tie down support inside where wire bundles may be zip tied into place. This design was set up for use with a simple 30mmx30mmx10mm fan mounted on the inside blowing across the stepper drivers.
Screw holes in the top of the case are sized to allow pressing in of threaded brass sleeves, you may want do down size the holes if you will not be using threaded sleeves to receive m3 screws. Available on Amazon here. https://www.amazon.com/gp/product/B01IYWUUH8
Added an adapter plate that will allow mounting an Einsy Rambo Controller board on the inside. However the USB Port will not easily be accessible from the outside in the traditional manner.
Added an adapter plate that will allow mounting the Controller board for the CR10/s "Creality V2" board.
View the Entire Mod on youtube
More from 3D Printer Parts
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving gustofusion a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.