With the recent wet weather I wanted something to allow me to place my GT-M200 in mud or grass without actually having to place the quad on the ground, I developed this for my GT-M200 but I would imagine it would fit most other true X 5 inch mini quads, its still a work in progress but does allow you to take off easily (although don't tilt forward initially until your clear) and comfortably fits a 4S 1300mAh battery within the cradle. Tried the prototype out to day an was pleased with the results although so view my Cura screen shot on how to print as I had a few attempts but found this to work the best.
Hopefully it will inspire some more Grass Launchers to be uploaded as I could only find stands designed for hard flat surfaces.
Please note this isn't designed for track racing as the angle is only 10 degrees so the quad butts up against to the arm tabs, if you wanted to increase the legs and tilt more it might work ok for track racing.
See Cura Screen Shot for setting and hot to position, if anyone finds a better way to print please feedback.
Will require supports removed and about 30min of trimming and sanding
Need Exacto Knife
Need Sand paper