Iron Man arc reactor made in Fusion 360 and 3d printed with the Cr-10 and the Anet A8.
All the details are in the image with the parts list. If you want to download at full quality here is the link:
Part 10 needs to be printed 10 times.
The Part_9.stl needs to be printed with a raft, 1 base layer and 1 top layer at 30% raft infill, that raft it's the grid you see on the image.
In order to not use a resistor the LED's needs to have a forward voltage of 3.6V and be from de same package.
Screws used: 3 M2x4 and 3 M3x8
Any question please send me an email to: