I picked up a new Dell Inspiron Laptop (see more here: https://amzn.to/2Jx5Sgm ) to run a quantum simulator as I can install 32gig's of ram in it affordably, however wanted a desk stand for it, so figured it was a good candidate for a "Rapid Design" project! Also my plan is to finish the PLA with a faux stone finish (see more here: https://amzn.to/2qksuaP ). This has a 14.2mm front opening, so any 13 or 14 inch slim or ultrabook laptop which is less then that at the front should fit. I would also recommend some self-adhesive felt (see more here: https://amzn.to/2qitDjc ) to prevent the plastic from maring the laptops case.
If you are looking for one of a kind swag shop for yourself or a Maker Geek friend, visit our swag shop at http://Swag.DIY3DTech.com for unique 3D Printing, Laser Cutting and CNC swag! Too, if you want a behind the scene look at what we are working on be sure to follow us on Instagram (https://www.instagram.com/diy3dtech/)! .
Any 300mm x 300mm
.2 or .3 you decide
20% should work
Would also suggest using a brim as the band is narrow and could warp. I also suggest finishing the PLA with a faux stone finish (see more here: https://amzn.to/2qksuaP ). As well as recommend some self-adhesive felt (see more here: https://amzn.to/2qitDjc ) to prevent the plastic from maring the laptops case.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.